ProCair Prime Mattress Replacement
$3,900.00
or make 4 interest-free payments of $975.00 AUD fortnightly with
More info
The ProCair Prime is a ground breaking, all-in-one alternating pressure mattress with an integrated pump. The ProCair Prime is adaptable for different clinical needs. It can be used as a fully alternating pressure mattress and can also be easily converted to a hybrid foam mattress
Easy to setup, the ProCair Prime automatically adjusts the pressure to suit the weight of the patient and does not need a separate pump unit to hang from the bed – it is all built in! This minimises trip hazards or damage from pumps being bumped off the bed.
WATCHAutoCair
No more concerns over correct pressure level settings with our AutoCair feature – continuous automatic weight sensing technology that delivers fail safe patient comfort levels.
EasyCair
All in one system with combined mattress and pump with easy setup and does not require a bed end to hang a separate pump. The pump is also protected from potential damage from accidentally being bumped off a bed end. The all in one system can be easily and quickly moved between beds.
DuoCair
Mattress can be easily converted to a hybrid mattress by adjusting the position of a built-in foam layer. Hybrid mode provides even greater comfort for the patient. Easily and quickly converts back into dynamic mode to step-up to complete pressure off-loading if required
| ProCair Prime Mattress Replacement System | ProCair Prime Mattress Replacement System, King Single | |
| Product Code | APMPC-R03 | APMPC-R03K |
| Warranty | 3 Years | |
| Overall Dimensions |
2000 mm (L)x 900 mm (W) x 180 mm (H) |
2000 mm (L) x 1050 mm (W) x 180 mm (H) |
| Wound stage | 1-3 (High - Very High Risk) | |
| Waterlow Score | 15-20 | |
| Braden Score | <12 | |
| Safe Working Load | 40 Kg - 200 Kg | |
| Mattress weight | 12 Kg | 13 Kg |
| Therapy type | 2 Cell Cycle Therapy | |
| Dark blue, polyurethane-laminated nylon – water resistant, vapour permeable multi-stretch | ||
| Mattress | TPU laminated nylon | |
| Unzip and remove the top cover from the base before washing (refer page 19 for instructions). For basic care and cleaning, wipe down with warm water containing PH neutral detergent. The top cover can also be machine washed at a maximum of 95° C (203° F) using neutral detergents. | ||
| Swab the mattress base and cells with a solution of sodium hypochlorite or similar (up to 10,000 ppm available chlorine). Dry thoroughly before reassembly. Do not machine wash or tumble dry the air cells or mattress base.Do not machine wash or tumble dry the air cells or mattress base. | ||
| Disconnect control unit from mains power before cleaning. Gently wipe down the external case with a soft cloth. Soak the cloth in warm water containing mild PH neutral detergent, and wring any excess water before gently wiping all external controls. Repeat the process with a dry cloth to remove excess moisture. A soft bristled nylon brush can be used to gently clean crevices. | ||
| ALTITUDE -310 metres to 3000 metres | ||
| Operating environment | Operation 15°C to 35°C Storage 5°C to 60°C | |
| Pressure Setting Levels | 5 Levels (Manual) | |
| Control Unit Cycle Time | 12 Minutes | |
| Control Unit Cleaning Disconnect control unit from mains power before cleaning. Gently wipe down the external case with a soft cloth. Soak the cloth in warm water containing mild PH neutral detergent, and wring any excess water before gently wiping all external controls. Repeat the process with a dry cloth to remove excess moisture. A soft bristled nylon brush can be used to gently clean crevices. |
||
| Care Instructions | Unzip and remove the top cover from the base before washing (refer right). For basic care and cleaning, wipe down with warm water containing PH neutral detergent. The top cover can also be machine washed at a maximum of 95° C (203° F) using neutral detergents. | |
This item non refundable due to health and hygiene reasons. For full details regarding our Returns Policy please click here or contact us to discuss further.
Please review our returns and refund policy before purchasing.
WE SHIP AUSTRALIA WIDE
- Under $100 = $22.00
- Over $100 = $29.95*^
*FREE SHIPPING for disposable continence aids over $100
If multiple products are purchased shipping may be more expensive as these may be sourced from different warehouses.
While in the majority of situations we are able to honour the above rates, there are situations where we cannont. In these cases we will contact you with a quote for freight.
Approximate Delivery Times;
- Metro - 3 to 5 days
- Regional - 5 to 10 days
Express/Overnight - all items are sent via Courier/Express Post
Gimel is an NDIS registered, Australian family business that offers personalised service to people, service providers and carers.
We ensure access to quality assistive products and equipment at competitive prices, and provide free and fast quotes.
We're based in Melbourne, and sell Australia-wide with warehouses in all major cities, servicing customers with fast delivery.
Our products include continence aids, electric beds, patient handling solutions, toilet seat raiser, non-slip bathroom mat and more.
